Quote:
|
Originally Posted by Triple6
(Post 8835478)
Many newer D-Link's can be unbricked using the built-in D-Link Emergency Room feature.
From the router's Emergency Room Web interface. To access the Emergency Room Web interface follow these steps: Unplug the router's power cord and wait 20 seconds. Get a pin, push the RESET button and KEEP IT PRESSED. Connect the power cord back (while still keeping the reset button pressed) Keep the reset button pressed for an additional 5 seconds after connecting power cord and then release. At this point you should see the power button blinking orange. Connect over a WIRED connection to the router and set your network adapter IP MANUALLY to 192.168.0.2 Open http://192.168.0.1 in a browser. You should see a white page with a Browse and Upload button. You will need to download the firmware update from the DLInk website prior to starting this. |
