Quote:
|
I read that unless the power line was on the same circuit, |
Quote:
|
I tried the extender and it did not help that much |
Quote:
|
I had read on a Verizon help page that someone had hooked their own Router with a separate Modem. |
Quote:
|
The existing is a D-Line Wireless ADSL 2 + router |
you can use xirrus to map out your signal condition, your looking to be above -70 and the extender should be placed where there is a signal of approx -50 to -60
------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.
If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
( the site now appears to require a business email, and does not allow webbased emails like gmail,hotmail or yahoo etc )
Use the links below
http://www.pcworld.com/downloads/fil.../download.html
http://www.softpedia.com/progDownloa...oad-99109.html
Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.
Run the program
A user guide is available here
http://www.xirrus.com/cdn/pdf/xirrus...ctorguide1-2-0
post a screen shot of the program running.
if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.
post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)
Note:
For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better. "A desirable signal level for a robust Wi-Fi connection will be green".
note: the signal level is a negative number, so for example -88 is worst and -40 is better
To post a screen shot of the active window.
Windows XP
Hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
Vista or Windows 7
you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool
http://www.bleepingcomputer.com/tuto...snipping-tool/
Windows 8
you can use the snipping tool > Open Snipping Tool (From the Windows 8 Start Screen, type "snip" and press enter.
>Press the Esc. key.
>go back to your Windows 8 start screen - Swipe from left or press Window Button
>Press Ctrl+PrntScr button to use Snipping Tool
see here
http://www.pcadvisor.co.uk/opinion/w...-in-windows-8/
http://www.pcadvisor.co.uk/how-to/wi...-in-windows-8/
To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
Full details are available here http://library.techguy.org/wiki/TSG_...g_a_Screenshot